歡迎訪問山東途暢路橋工程有限公司網站!

冷再生機租賃,水泥撒布車出租

施工租賃熱線

18264104888

您現在所在的位置 :首頁 - 新聞中心 > 行業資訊
行業資訊

冷再生的不同之處!
來源:http://www.bystreet.cn/ 日期:2021-03-31
1,成本低
1. Low cost
據介紹外國建筑材料,與舊層壓材料新的覆蓋方法相比,就地冷再生能的約20%的成本降低到46%。
According to the introduction of foreign building materials, compared with the new covering method of old laminated materials, the cost of in-situ cold regeneration energy is reduced from about 20% to 46%.
2,完善的老路級
2. Perfect old road level
通過增加基層的承載能力,改善道路,實現從根本上,這是低等級公路,特別是有特殊的含義。
By increasing the bearing capacity of the grass-roots, improve the road, fundamentally, this is a low-grade highway, especially has a special meaning.
3,結構完整性
3. Structural integrity
由冷再生生產制服厚層壓板,也有時可見之間沒有淡薄接口覆蓋傳統的施工方法。
Sometimes it can be seen that there is no thin interface between uniform thick laminates produced by cold recycling to cover the traditional construction method.
4,不損傷路基
4. No damage to subgrade
由于一次性冷再生實踐,再生單元就暴露路基通過一次。與傳統的施工方法,對路基的損傷較小相比。
Due to the practice of one-time cold regeneration, the regeneration unit will expose the subgrade to pass once. Compared with the traditional construction method, the damage to the subgrade is smaller.
            冷再生機出租
5,節省材料
5. Save materials
所有舊的局部使用的所有材料層,從而大大降低了新材料,以保護資源的量。
All the old parts use all the material layers, thus greatly reducing the amount of new materials to protect resources.
6,施工周期短
6. Short construction period
由于在舊料無運輸問題,舊機器和目標上沒有任何其他材料碎散,刪除不需要的散裝物料破碎化,化,更重要的是,一次性操作施工過程中的特點大大簡化了施工過程中,從而節省了施工時間。
Because there is no transportation problem in the old materials, and there is no other materials scattered on the old machines and targets, it is necessary to delete the unnecessary bulk materials, fragmentation and specialization. More importantly, the characteristics of one-time operation in the construction process greatly simplify the construction process, thus saving the construction time.
7,保護環境
7. Environmental protection
因為對于使用舊的材料大大降低新材料的開發,沒有交通和舊材料的堆放問題。符合要求的根本。
Because for the use of old materials greatly reduce the development of new materials, there is no traffic and old material stacking problems. Meet the fundamental requirements of environmental protection.
感謝您的閱讀,希望以上內容對您有所幫助,如您想了解更多精彩內容請多多關注我們的網站。
Thank you for reading, I hope the above content is helpful to you, if you want to know more wonderful content, please pay more attention to our website.
  • 上一條:什么是冷再生材料成形?
  • 下一條:冷再生技術質量檢查程序是什么?
  • 相關產品: